唐山西林牌前移式叉车

河北骏豪机械设备有限责任公司
联系人：张经理
1、采用聚酯纤维排管，弹性好，孔径小，电阻低，透气性高；
2、完全绝缘的软连接线，无漏电电流；
3、弹开**面塞的阀结构，带有特殊的电解液液面指示器；
4、配带自动补水的注液帽；
5、采用多微孔进口优质斜状隔板，孔率高，电阻低；
6、采用PP电池壳、盖材料，耐冲击；
7、拥有**的端子密封结构完全防止较板增长和漏液。
forklift batteries
1 、 adopt polyester fiber row pipe, good elasticity, small aperture, low resistance, high permeability;
2 、 completely insulated soft connecting wire, no leakage current;
Valve structure 3, open top surface elastic plug, with special electrolyte level indicator;
4 、 water injection cap with automatic feeding;
5 、 adopt multi hole imported high quality inclined clapboard, with high hole rate and low resistance;
6 、 adopt PP battery shell, cover material, shock resistance;
7 、 patent terminal sealing structure, completely prevent the growth of plate and leakage.
       天有不测风云，人有旦夕祸福，单独一个人能有多大能量？能应付得了危机重重，千变万化的困境？即使单独一人取得了巨大的成功，拥有了亿万财富，若没有几个“铁杆哥们”同甘苦，共患难，又有什么价值？
    各显各的神通，群体一起过海，互相欣赏，相互照应，就象变形金刚那样，分开，可各自*自作战，协同作战，合拢，就是一个战无不胜的金刚体。不热爱群体的人生是寂寞孤独的可怜人生。
蓄电池在充放电过程中，电解液中的水会因为电解和蒸发而逐渐减少，导致电解液面下降。如果不及时补充的话，有可能缩短蓄电池的使用寿命，应及时补充蒸馏水。切忌用饮用纯净水代替，因为纯净水中含有多种微量元素，对蓄电池会造成不良影响。
给蓄电池添加电解液或水时要注意，电解液高过较板10至15毫米即可；有两条红线的蓄电池，电解液不得**过上红线。电解液太满会从蓄电池盖小孔中溢出。一旦流到蓄电池正、负两较之间，就会形成回路自放电。遇此情况就应将电解液擦掉，或用开水冲洗擦净。
加电解液时若有东西不慎掉入，千万不能用金属物去[2]  捞，应用木棒夹出杂质；如用铁丝或铜丝去捞，金属分子会在硫酸的腐蚀下进入蓄电池形成自放电而损坏蓄电池。
车辆停止运行若**过20天，应当拆卸电池的负极电线，以免发生漏电事故。
Matters needing attention
In the process of charging and discharging, the water in the electrolyte will gradually decrease because of electrolysis and evaporation, leading to the decrease of the electrolyte level. If not promptly added, it is possible to shorten the service life of the battery, should be added to the distilled water. Avoid using purified water instead of water, because pure water contains a variety of trace elements, the battery will cause adverse effects.
When adding electrolyte or water to the battery, be careful that the electrolyte is 10 to 15 millimeters higher than the plate, and that the battery with two red lines shall not exceed the upper red line. The electrolyte is too full and will overflow from the small hole in the battery cover. Once flowing between the positive and negative poles of the battery, the circuit will form a self discharge. In this case, the electrolyte should be rubbed off or rinsed with boiling water.
And if something inadvertently fall into the electrolyte, do not use metal to make [2] application, stick out impurities; such as wire or copper wire Qulao, metal elements in sulfuric acid corrosion into the battery self discharge and damage to the battery.
If the vehicle is stopped running for more than 20 days, the negative wire of the battery shall be removed so as to avoid leakage accident.